[RE-wrenches] Racking identifaction request

[Jeremy Coxon]

Strange request here.  I’m trying to identify the type of racking shown in the attached picture.  I have an application for an aluminum rail that is slotted on all 4 sides.  Basically need to have a rail that allows a bolt head to slide on any of the 4 sides so that I can make a box/table structure.




Best Regards,
Jeremy Coxon NABCEP # 091308-21
MWBE Certified



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210818/d098ff3b/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PastedGraphic-1 copy.jpeg
Type: image/jpeg
Size: 234510 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210818/d098ff3b/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: img.jpeg
Type: image/jpeg
Size: 13108 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210818/d098ff3b/attachment-0001.jpeg>