[RE-wrenches] Conext Configuration Tool password needed

[greg egan]

Esteemed Wrenches,  Working on a system with 4 XW+ inverters.  Using a 
conext config tool I used a few years ago. I am trying to set the AC 
output voltages on the inverters so they were within .5 VAC per the 
manual.  When you try to configure the AC output It gives you a warning 
and requires a password.  I have tried the password that worked with the 
Gateway and guessed at many others but no luck.  I did a word search for 
"password" in all the schneider O & M manuals that had anything remotely 
to do with inverters, config tool, multi inverter systems etc.

Anyone know the secret handshake?  If I made one years ago and no longer 
have it does anyone know how I can reset it?

Also wondering if anyone is using the new combox successfully with XW+ 
inverters?  Looks like Schneider discontinued the XW+ line as well as 
the original combox.  I've heard good things about the combox and would 
like to try out the new version if it's compatible.

Thanks in advance, I appreciate it!

Greg Egan
Remote Power Inc.
Fairbanks, AK