[RE-wrenches] OutBack Inverters
John Blittersdorf
john.blittersdorf at gmail.com
Tue May 18 10:53:49 EDT 2021
Dave,
An Alternate solution might be to find two good used VFX3524's. All
circuit boards are available from Zonna if they need repair. I have one if
you could find another somewhere.
Contact me off list if interested.
John Blittersdorf
NABCEP Certified Solar PV Installer™
CV Wind Service (and solar)
200 West Road
N Chittenden, VT 05763
802-770-8625
www.offgridvermont.com
On Mon, May 17, 2021 at 4:18 PM <palumbo131m at gmail.com> wrote:
> I am considering swapping in new OutBack inverters into one of my
> neighborhoods 24V off grid systems. It now has two FX2524’s. The demands on
> the system have grown, now a two family home with a 240Vac mini-split for
> air conditioning and a 240Vac Grundfos SQ 1/2hp sub pump to be added this
> summer to the system. Drilling a well for a back-up to the gravity fed
> spring water which has been getting too low during the past few summers.
>
> I’m assuming that I should go with two VFXR3524’s.
>
> Will this be a direct swap in as far as having the same wiring setup into
> an OutBack Flexware system? And will it work with an older Mate?
>
> Anything else I should know about these OutBack “R” inverters?
>
>
>
> Dave Palumbo
>
> Hyde Park, VT
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210518/512d9c13/attachment.htm>
More information about the RE-Wrenches
mailing list