[RE-wrenches] OutBack Inverters

[Jay]

Hi dave

You’ll need a new hub and mate 3S. 


And check to make sure the main breakers are 250 amp. 

Jay
Peltz power. 





> On May 17, 2021, at 8:21 AM, palumbo131m at gmail.com wrote:
> 
> 
> I am considering swapping in new OutBack inverters into one of my neighborhoods 24V off grid systems. It now has two FX2524’s. The demands on the system have grown, now a two family home with a 240Vac mini-split for air conditioning and a 240Vac Grundfos SQ 1/2hp sub pump to be added this summer to the system. Drilling a well for a back-up to the gravity fed spring water which has been getting too low during the past few summers.
> I’m assuming that I should go with two VFXR3524’s.
> Will this be a direct swap in as far as having the same wiring setup into an OutBack Flexware system? And will it work with an older Mate?
> Anything else I should know about these OutBack “R” inverters?
>  
> Dave Palumbo
> Hyde Park, VT
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210517/37ff4ffb/attachment.htm>