[RE-wrenches] OutBack Inverters

[palumbo131m at gmail.com]

I am considering swapping in new OutBack inverters into one of my
neighborhoods 24V off grid systems. It now has two FX2524's. The demands on
the system have grown, now a two family home with a 240Vac mini-split for
air conditioning and a 240Vac Grundfos SQ 1/2hp sub pump to be added this
summer to the system. Drilling a well for a back-up to the gravity fed
spring water which has been getting too low during the past few summers. 

I'm assuming that I should go with two VFXR3524's.

Will this be a direct swap in as far as having the same wiring setup into an
OutBack Flexware system? And will it work with an older Mate?

Anything else I should know about these OutBack "R" inverters?

 

Dave Palumbo

Hyde Park, VT

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210517/f7567ca0/attachment.htm>