[RE-wrenches] Breakers weakening?
Kirk Herander, VSE
kirkh at vermont.solar
Sun May 9 08:52:35 EDT 2021
That's what I expected to find, i.e. evidence of a heat event / loose connection at the breaker terminals (discolored and / or melted wire insulation, etc.), no visual evidence or smell.
Kirk Herander / kirkh at vermont.solar [mailto:kirkh at vermont.solar]
Owner|Principal, VT Solar, LLC
Celebrating our 30th Anniversary 1991-2021!!
www.vermont.solar [https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636842843233477645&sdata=0NjyuKeQbEK6245SNnk8X4XnP9Q%2B%2BqtvcALkdDghvk4%3D&reserved=0]
dba Vermont Solar Engineering
802.863.1202
On 5/8/2021 7:32:53 PM, Dave Tedeyan <dave at sungineersolar.com> wrote:
Kirk,
Could there be a loose wire connection to the breaker? That could cause it to heat up an trip sooner than it otherwise would.
Cheers,
Dave
On Sat, May 8, 2021, 2:13 PM Kirk Herander, VSE <kirkh at vermont.solar> wrote:
I have a system where the SE10000 inverter fried internally. The 60A AC output breaker tripped several times, as a result of the homeowner resetting over and over until he called me.
I replaced the inverter under warranty and all is fine, except on sunny days the breaker will trip at about 40A, close to the max output of the inverter. Reset it outside of peak inverter output and its good. I assume the breaker has weakened from stress of some sort, so I replaced it and time will tell.
Anyone ever seen a breaker have it's trip point reduced like this?
Kirk Herander / kirkh at vermont.solar [mailto:kirkh at vermont.solar]
Owner|Principal, VT Solar, LLC
Celebrating our 30th Anniversary 1991-2021!!
www.vermont.solar [https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636842843233477645&sdata=0NjyuKeQbEK6245SNnk8X4XnP9Q%2B%2BqtvcALkdDghvk4%3D&reserved=0]
dba Vermont Solar Engineering
802.863.1202
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org [http://re-wrenches.org]
List Address: RE-wrenches at lists.re-wrenches.org [mailto:RE-wrenches at lists.re-wrenches.org]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org]
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ [https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/]
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org]
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm [http://www.re-wrenches.org/etiquette.htm]
Check out or update participant bios:
http://www.members.re-wrenches.org [http://www.members.re-wrenches.org]
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches at lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210509/eba7431d/attachment.htm>
More information about the RE-Wrenches
mailing list