[RE-wrenches] 2HP submersible ala OB Flexpower2

[Jay]

Hi Bill

Yes it will work, of course depends on if there are other large loads on at the same time 

The radian has greater start surge. 

Jay
Peltz Power

> On Apr 5, 2021, at 9:16 AM, frenergy <frenergy at psln.com> wrote:
> 
> Off-gridders,
> 
>             I'm looking for anyone who has experience powering a 2 HP (or even a 1 1/2 HP) submersible 3-wire well pump with a OB FlexPower2 (30 KWhrs of L-ion battery at 48 volt).  I'm mostly interested in just starting the pump as I'm sure it would run it. The lift out of the well is 110 feet plus it would be starting against 30 psi into an elevated tank.  I'm not concerned about flickering lights because of the elevated storage tank the pump only runs once a day, whilst sunny.
> 
> Any experiences welcome.
> 
> Bill
> 
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.
> Taylorsville, CA 95983
> 530.284.7849
> CA Lic 874049
> www.frenergy.net
> 
> 
> -- 
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>