[RE-wrenches] 2HP submersible ala OB Flexpower2

[Dave Angelini Offgrid Solar]

Hey Bill,
I think you need to spec the model that is in there more that the HP. When
you say 3 wire is the controller above ground like a Franklin with the
capacitors and reduced surge? I do not know the Outback models by memory,
it is 240 right? That depth does not sound too expensive to replace the
pump with a soft start like Grundfos.  Good Luck!

Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridsolar at sti.net
text 209 813 0060

On Mon, 5 Apr 2021 08:18:32 -0700, frenergy <frenergy at psln.com> wrote:
> Off-gridders,
> 
>              I'm looking for anyone who has experience powering a 2 HP
> (or even a 1 1/2 HP) submersible 3-wire well pump with a OB FlexPower2 
> (30 KWhrs of L-ion battery at 48 volt).  I'm mostly interested in just 
> starting the pump as I'm sure it would run it. The lift out of the well 
> is 110 feet plus it would be starting against 30 psi into an elevated 
> tank.  I'm not concerned about flickering lights because of the elevated

> storage tank the pump only runs once a day, whilst sunny.
> 
> Any experiences welcome.
> 
> Bill
> 
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.
> Taylorsville, CA 95983
> 530.284.7849
> CA Lic 874049
> www.frenergy.net