[RE-wrenches] Outback settings adjustment so batteries consume less of PV output

[Ray]

How big is the battery bank? How old is it?  It doesn't look that far 
off of what I've seen in GTB systems.

Ray Walters
Remote Solar
303 505-8760

On 3/19/21 12:21 PM, Christopher Warfel wrote:
> I have not been able to find a way to set my customers battery 
> charging parameters so that the AGM batteries do not consume less of 
> the pv output to maintain charge.  Here is an Optics view of the 
> situation with a small image embedded. (If you can answer, please 
> remove image per Mr. Welch's request.
>
> I have the absorb voltage at 54.3 for one hour, the float voltageat 
> 54, the equalize at 56 (disabled for this battery type).
>
> It seems like this is a lot of energy being used by the batteries, but 
> I am hoping that some one with more experience in these settings can 
> weigh in on any changes I should make, or if this is just how it is.  
> Thank you, Chris
>
>
>
>
>
>