[RE-wrenches] Outback settings adjustment so batteries consume less of PV output

[Christopher Warfel]

I have not been able to find a way to set my customers battery charging 
parameters so that the AGM batteries do not consume less of the pv 
output to maintain charge.  Here is an Optics view of the situation with 
a small image embedded. (If you can answer, please remove image per Mr. 
Welch's request.

I have the absorb voltage at 54.3 for one hour, the float voltageat 54, 
the equalize at 56 (disabled for this battery type).

It seems like this is a lot of energy being used by the batteries, but I 
am hoping that some one with more experience in these settings can weigh 
in on any changes I should make, or if this is just how it is.  Thank 
you, Chris





-- 
             Christopher Warfel
                      ENTECH Engineering, Inc.
PO Box 871, Block Island, RI 02807
                                 401-466-8978
<http://entech-engineering.com>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210319/85ea1dba/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ocakkhfgpkdjhmco.png
Type: image/png
Size: 411375 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210319/85ea1dba/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EEIlogolong.jpg
Type: image/jpeg
Size: 17117 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210319/85ea1dba/attachment.jpg>