[RE-wrenches] XW Pro multi-inverter

[Dave Angelini Offgrid Solar]

Hi Kent, 

I appreciate the sound tip on the water fill jug! OK, there
is an issue here and I did a temporary fix. There is 1.10 firmware that was
supposed to be out at xmas. It is coming and they know about this. 

I
assume you have other devices? Mppts, Bat mon, or SCP. and the Gateway! Let
me know. I used all of the XW's on one xanbus and the rest of the devices
on the other xanbus. This was approved by Schneider. 

They are trying to
get the XWP to run 3 phase ASAP and I assume that this has gone to the side
burner. 

What firmware and is this grid or offgrid? Have you escalated
this to Schneider? They need to hear from you! 

Back in the AM, going to
the big city of Mariposa....  

Dave Angelini Offgrid Solar
"we go where
powerlines don't"
http://members.sti.net/offgridsolar/ [1]
e-mail
offgridsolar at sti.net [2]
text 209 813 0060

On Wed, 10 Feb 2021 15:08:58
-0800, Kent Osterberg  wrote:   Have any wrenches out there installed a
Schneider XW Pro multi-inverter setup with three inverters per the
multi-inverter design guide [3]? I've got one installed per the manual and
am having a devil of a time getting it to stay latched onto the generator
with the external contactor. Can't even get it to stay latched on with no
load. All advise on getting this to work is appreciated.

 Kent Osterberg

Blue Mountain Solar

Links:
------
[1]
http://members.sti.net/offgridsolar/
[2] mailto:offgridsolar at sti.net
[3]
https://solar.schneider-electric.com/download/xw-pro-iec-technical-publications/?ind=13539&filename=XW-Pro-Multi-unit-Design-Guide-990-91373.pdf&wpdmdl=10327&refresh=6024628387f561612997251
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210210/9bc3c7cb/attachment.htm>