[RE-wrenches] Radian Charges 1 hour per calendar day

[drake.chamberlin at redwoodalliance.org]

Jay,

The generator is manual start.

Drake

---


On 2021-01-08 15:39, Jay wrote:
> Is it ags start and is it starting on volts or %, or load?
> 
> 
>> On Jan 8, 2021, at 1:10 PM, Dave Angelini Offgrid Solar 
>> <offgridsolar at sti.net> wrote:
>> 
>> You said both, it will go into absorb for an hour only and it will 
>> net go
>> into absorb. Which one please?
>> 
>> Is there an AGS?
>> 
>> 
>> Dave Angelini Offgrid Solar
>> "we go where powerlines don't"
>> http://members.sti.net/offgridsolar/
>> e-mail offgridsolar at sti.net
>> text 209 813 0060
>> 
>>> On Fri, 08 Jan 2021 13:33:56 -0500, 
>>> drake.chamberlin at redwoodalliance.org
>>> wrote:
>>> Hello Wrenches,
>>> 
>>> An off grid, Radian / Mate 3 system we set up some years back has 
>>> worked
>> 
>>> flawlessly. The client is now reporting that his system will only go
>>> into absorption charge for 1 hour per calendar day. The setting was
>>> previously to absorb for 2 hours.
>>> 
>>> He has tried shutting off the generator and then restarting. The
>>> inverter will connect, but not go into absorb.
>>> 
>>> During this cloudy period, he is only able to get the batteries to 
>>> about
>> 
>>> 80 percent before he needs to leave the site for a week or so.
>>> 
>>> I finally go through to Outback, and they think it is a Firmware
>>> problem. As it is a long drive out, it seems worth while to run it by
>>> the list. Does FW this seem like the issue?
>>> 
>>> Thank you,
>>> 
>>> Drake
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> There are two list archives for searching. When one doesn't work, try 
>> the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try 
> the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org