[RE-wrenches] Radian Charges 1 hour per calendar day
Jay
jay.peltz at gmail.com
Fri Jan 8 15:39:40 EST 2021
Is it ags start and is it starting on volts or %, or load?
> On Jan 8, 2021, at 1:10 PM, Dave Angelini Offgrid Solar <offgridsolar at sti.net> wrote:
>
> You said both, it will go into absorb for an hour only and it will net go
> into absorb. Which one please?
>
> Is there an AGS?
>
>
> Dave Angelini Offgrid Solar
> "we go where powerlines don't"
> http://members.sti.net/offgridsolar/
> e-mail offgridsolar at sti.net
> text 209 813 0060
>
>> On Fri, 08 Jan 2021 13:33:56 -0500, drake.chamberlin at redwoodalliance.org
>> wrote:
>> Hello Wrenches,
>>
>> An off grid, Radian / Mate 3 system we set up some years back has worked
>
>> flawlessly. The client is now reporting that his system will only go
>> into absorption charge for 1 hour per calendar day. The setting was
>> previously to absorb for 2 hours.
>>
>> He has tried shutting off the generator and then restarting. The
>> inverter will connect, but not go into absorb.
>>
>> During this cloudy period, he is only able to get the batteries to about
>
>> 80 percent before he needs to leave the site for a week or so.
>>
>> I finally go through to Outback, and they think it is a Firmware
>> problem. As it is a long drive out, it seems worth while to run it by
>> the list. Does FW this seem like the issue?
>>
>> Thank you,
>>
>> Drake
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
More information about the RE-Wrenches
mailing list