[RE-wrenches] Sol-Ark Gen Exercise Cycle

Jay jay.peltz at gmail.com
Wed Nov 11 15:16:48 EST 2020


Hi Chris

I would install a timer. There are many dry contact dc or ac powered with a high degree of programmability. 

A question about the normal function of the AGS. I’ve talked to a few people that have mentioned that the ags has its own fuzzy logic, with limited programming. And they have had issues with it not turning on or not turning off 

What do you say?

Jay

> On Nov 11, 2020, at 10:43 AM, Glenn Burt <Glenn.burt at glbcc.com> wrote:
> 
> 
> I believe the Atkinson GSCM could be used to do this.
> 
> -Glenn
> Sent from my 'smart'phone, so please excuse typos and spelling errors.
> 
> ------ Original message------
> From: Chris Sparadeo
> Date: Wed, Nov 11, 2020 11:16 AM
> To: RE-wrenches;
> Cc:
> Subject:[RE-wrenches] Sol-Ark Gen Exercise Cycle
> 
> Hi all,
> 
> According to Sol-Ark tech support, they do not currently have a programmable exercise cycle for
> its two-wire start function. When paired with a generator like a Generac Ecogen (exercise cycle is automatically disabled when configured with two wire start) this means that the only way to effectively run an exercise cycle on your generator would be to do it manually. I am wondering if anyone has run into this issue and if there are work arounds? Kind of a bummer and my first and only negative experience with Sol-Ark thus far. 
> 
> Kindly,
> 
> Chris Sparadeo 
> -- 
> Chris Sparadeo
> 
> 
> C_802-369-4458
> H_802-728-3059
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201111/67bce69a/attachment.htm>


More information about the RE-Wrenches mailing list