[RE-wrenches] factory module damage, has anyone seen this?

[Jay]

Hi Dana. 

I did think of that ( all kidding aside)but given the response from CS, I don’t think it’s normal. 


Weird to even think how you’d assemble it. Is the glass prebent or the frame or both?

I did hear from someone offsite they’d seen it on REC. 

Jay





> On Nov 4, 2020, at 2:45 PM, Dana Orzel <dana at solarwork.com> wrote:
> 
> 
> If they are Canadian maybe they are pre-flexed for snow load. Those crafty Canadians!
>  
>  
>  
> Dana Orzel                              Great Solar Works, Inc.
> C - 208.721.7003                       dana at solarwork.com
> Idaho Contractor - # 028765         Idaho PV # 028374
> NABCEP # 051112-136                       www.solarwork.com
> "Responsible Technologies for Responsible People since 1988" 
> P Please consider the environment before printing this email.
>  
>  
> From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of jay
> Sent: Wednesday, November 4, 2020 11:07 AM
> To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
> Subject: [RE-wrenches] factory module damage, has anyone seen this?
>  
> HI All,
>  
> I have some Canadian Solar bifacial BiHiKu 400 watt 72 cell modules that are bent from the factory.
>  
> There is no pallet damage, and the bend is the same top and bottom.
>  
> My question is has anyone seen this before? I this normal?
> CS says its within spec which seems BS to me.
> What should I ask for from CS?
>  
> What about return shipping cost, would this be something that I’d have to pay or CS?
>  
> So far they have offered $.10 per watt.  
>  
> What would you all do?
>  
> thanks in advance
>  
> jay
>  
> Peltz Power
>  
>  
>  
>  
>  
> <image003.jpg>
>  
>  
>  
>  
>  
>  
>  
>  
> <image004.jpg>
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201104/5d097361/attachment.htm>