[RE-wrenches] Supply side denial

[Kristopher Schmid]

Thanks for all the discussion and insight.  I believe the main issue here
is them being territorial about the meter socket (they did not install it
and they do not own it).  My follow up question to them was, "I assume that
you allow a 320 A meter socket feeding two main panels.  Is this
different?"  Waiting for a response...


Shine On!

Kris Schmid
Legacy Solar, LLC
137 West 1st Avenue
Luck, WI 54853
www.legacysolar.com
715-653-4295
NABCEP Certified PV Installation Professional
Licensed Wisconsin Master Electrician
BSEE


On Wed, Oct 28, 2020 at 5:47 AM Christopher Warfel <
cwarfel at entech-engineering.com> wrote:

> I would think that would be illegal.  They don't have jurisdiction on
> supply side taps. It's past the meter, and expressly allowed in the NEC.  I
> would definitely first ask to talk to a higher level person than the one
> denying it (paper trail important). If that does not work, then the PSC is
> your best option.  Chris
> On 10/27/2020 6:27 PM, Kristopher Schmid wrote:
>
> Hi All,
>
> I have a utility that is hinting that they are going to deny my
> interconnection application with a supply side connection and require a
> load side.  Has anyone seen this before?
>
> (Proposed interconnection would be with Milbank step lugs in a 200 A
> socket and a 60 A fused disconnect within 10 feet.)
>
> If they refuse it, i am thinking that registering a complaint with the
> Wisconsin PSC may be appropriate.
>
> Kris
>
>
> Shine On!
>
> Kris Schmid
> Legacy Solar, LLC
> 137 West 1st Avenue
> Luck, WI 54853
> www.legacysolar.com
> 715-653-4295
> NABCEP Certified PV Installation Professional
> Licensed Wisconsin Master Electrician
> BSEE
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:http://www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201028/7adcca0c/attachment.htm>