[RE-wrenches] DPW rack adjustment

Ray ray at solarray.com
Fri Oct 16 11:53:02 EDT 2020


We've used an adjustable link like this

Ray Walters
Remote Solar
303 505-8760

On 10/15/20 12:50 PM, Chris Schaefer wrote:
> I'd suggest reaching out to Travis at MT Solar as he has made custom 
> manual adjusters for my old installed DPW pole mounts. No bolts to 
> remove and easy for anyone to adjust the angle without the need of a 
> ladder.
>
> Christopher
>
> On Thu, Oct 15, 2020 at 10:25 AM Jay <jay.peltz at gmail.com 
> <mailto:jay.peltz at gmail.com>> wrote:
>
>     Hi Jeremy,
>
>     I’ve not run into that issue but you could put more bolts at
>     different locations for different tilts.
>
>     A template would keep them the correct spacing.
>
>     Wouldn’t slide but would be adjustable.
>
>     I don’t know if you’ve tried heat but it’s pretty amazing at
>     getting things loosened up.
>     The other way is cold, using a spray can for computers for example.
>     Or using the combo.
>
>     Damn it’s just a stupid rack, should be easy.
>
>     Jay
>
>     Peltz power.
>
>
>
>>     On Oct 15, 2020, at 7:52 AM, Jeremy Rodriguez
>>     <allsolarjeremy at msn.com <mailto:allsolarjeremy at msn.com>> wrote:
>>
>>      Does anyone have any trick to adjusting the tilt angle of the
>>     TPM4 pole mounts?  These are the racks with the aluminum beam
>>     (strongback) with slots for the bolts.
>>     We have tried anti seize, and cutting the heads of the bolts
>>     square in attempts to help with adjustment.
>>     Help!
>>
>>
>>     Jeremy Rodriguez
>>     Solar Installation / Design Expert
>>     All Solar, Inc.
>>     1463 M St
>>     Penrose Colorado 81240
>>
>>     Sent by Jeremy's iPhone. Sorry for typos and shorthand.
>>     _______________________________________________
>>     List sponsored by Redwood Alliance
>>
>>     List Address: RE-wrenches at lists.re-wrenches.org
>>     <mailto:RE-wrenches at lists.re-wrenches.org>
>>
>>     Change listserver email address & settings:
>>     http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>>     There are two list archives for searching. When one doesn't work,
>>     try the other:
>>     https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>>     http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>>     List rules & etiquette:
>>     http://www.re-wrenches.org/etiquette.htm
>>
>>     Check out or update participant bios:
>>     http://www.members.re-wrenches.org
>>
>     _______________________________________________
>     List sponsored by Redwood Alliance
>
>     List Address: RE-wrenches at lists.re-wrenches.org
>     <mailto:RE-wrenches at lists.re-wrenches.org>
>
>     Change listserver email address & settings:
>     http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>     There are two list archives for searching. When one doesn't work,
>     try the other:
>     https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>     http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>     List rules & etiquette:
>     http://www.re-wrenches.org/etiquette.htm
>
>     Check out or update participant bios:
>     http://www.members.re-wrenches.org
>
>
>
> -- 
>
> Chris Schaefer’s
> <http:www.solarandwindfx.com>
> /Tel/Fax 585-229-2083 or Cell 585-748-1870
> //5115 South Hill Road ~ Canandaigua New York 14424
> //www.solarandwindfx.com <http://www.solarandwindfx.com> ~ E-mail: 
> chris at solarandwindfx.com <mailto:chris at solarandwindfx.com>/
>
> /
> /
>
> Thomas Jefferson, the author of our great Constitution, once said, 
> "democracy" will cease to exist when you take away from those who are 
> willing to work and give to those who would not."
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201016/2b5dda63/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: biinemamehlfalfl.png
Type: image/png
Size: 29708 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201016/2b5dda63/attachment.png>


More information about the RE-Wrenches mailing list