[RE-wrenches] DPW rack adjustment

[Jeremy Coxon]

I’ve found that using brass nuts work well and don’t seize on the SS bolt. Just be sure to use a lock washer.  It’s not like you need a lot of clamping force, the bolt is in pure shear so brass is fine.

Jeremy Coxon NABCEP 
Certified MWBE

Sent from my iPhone

> On Oct 15, 2020, at 9:52 AM, Jeremy Rodriguez <allsolarjeremy at msn.com> wrote:
> 
>  Does anyone have any trick to adjusting the tilt angle of the TPM4 pole mounts?  These are the racks with the aluminum beam (strongback) with slots for the bolts. 
> We have tried anti seize, and cutting the heads of the bolts square in attempts to help with adjustment. 
> Help!
> 
> 
> Jeremy Rodriguez 
> Solar Installation / Design Expert 
> All Solar, Inc.
> 1463 M St
> Penrose Colorado 81240
> 
> Sent by Jeremy's iPhone. Sorry for typos and shorthand. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201015/cb962410/attachment.htm>