[RE-wrenches] Mate3 verses Mate3S

[Tump]

I have a client w/ 8 stack of older VFX3648s, Off Grid. Presently connected to a Mate 3 & older hub 10.  The generator run time/shut down time is never the same, sometimes 10+ hours of running while the inverters in “silent” mode.  Gen stays running despite full batteries, confirmed by battery voltage & using my refractometer. 
The only "gen trigger" is battery voltage. I have cleared the history repeatedly & updated the Mate3 FW. 
 Is there any conflict replacing the Mate 3 with the Mate 3S in an older system?
I will be also changing out the Hub as well. Thoughts/suggestions
> Tump at swnl.net <blocked::mailto:Tump at swnl.net%22%20%5Co%20%22blocked::mailto:Tump at swnl.net>               www.SWNL.net <blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/>
>                 Solarwinds Northernlights       
>        Serving Mid Coast Maine & Northern California
>                          207-832-7574   Cl. 610-517-8401                              
>                               Blair "TUMP" May
>                ********  MAINE'S CHARTER ********
>                       NABCEP    "Certified PV Installer" 
>    
>               ********  MAINE'S CHARTER ********
>                   Trace Xantrex "Certified" Dealer / Installer"
> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201002/ded25553/attachment.htm>