[RE-wrenches] Getting Enphase IQ Cable into J Boxes

[Jason Szumlanski]

Just a quick tip for those of you installing Enphase. I recently discovered
there is a Heyco connector for TWO Enphase IQ cables and a bare ground in a
single 3/4" knockout. This has saved us a bunch of time. The rubber gland
is prepunched, but you can also use it for a single IQ cable since it is
not punched all the way through.

Part number is M3234GDA-SM, available through Mouser, Rexel, anyone who
sells Heyco I would imagine.

[image: image.png]


Jason Szumlanski
Florida Solar Design Group
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200911/2d2bca16/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 62008 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200911/2d2bca16/attachment.png>