[RE-wrenches] Mate 3s firmware upgrade issues

[William Miller]

Dan:

What version number is the firmware you are discussing?

William Miller
www.millersolar.com

> On May 8, 2020, at 8:56 AM, Dan Fink <danbob88 at gmail.com> wrote:
> 
> 
> Esteemed Wrenches;  Has anyone else experienced Optics RE connectivity issues upon updating the Mate 3s firmware to the latest March 2020 version?
> 
> I updated a perfectly functioning system last week, and the Mate 3s lost LAN connectivity. I rebooted the internet gateway and router, rebooted the Mate 3s, re-flashed the Mate update, wouldn't allow me to revert to previous firmware version, still says "connecting..."
> 
> Just curious if anyone else has seen this issue. The site is 4 hours away, so all I could do was set the Mate to reboot every 4 hours. Have not heard back from Outback yet on the support ticket.
> 
> Dan Fink
> Executive Director, Buckville Energy Consulting
> NABCEP PV Associate
> NABCEP Certified PV System Inspector
> IREC Certified Instructor™ for: 
> ~ PV Installation Professional
> ~ Small Wind Installer
> NABCEP Registered Continuing Education Providers
> danbob88 at gmail.com
> 970-672-4342
> 
>  
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200508/e4a219b0/attachment.htm>