[RE-wrenches] Disconnect spacing

[Benn Kilburn]

Looks fine to me, Jason. 
Did you ask him to cite a particular code rule?

Only other issue would be is if either of those pieces requires more space in their install instructions/Mfgr specs. 

Good luck

Benn Kilburn
SkyFire Energy
780-906-7807

> On Mar 11, 2020, at 10:18 AM, Jason Szumlanski <jason at floridasolardesigngroup.com> wrote:
> 
> I have an inspector telling me that this pictured fusible disconnect is too close to the adjacent enclosure. Is anyone aware of a code supported spacing requirement or manufacturer specification on such a thing? I have 3-1/2 inches from the handle to the enclosure which I believe is ample space for safe and effective operation of the handle. 
> 
> Jason Szumlanski
> <CameraZOOM-20200311121356077.jpg>
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>