[RE-wrenches] Contract permit packets
Sindelar Solar
Allan at sindelarsolar.com
Wed Feb 5 23:42:39 EST 2020
Jeff at Planet Plansets served me well too, with honesty and integrity
and a willingness to work with my situation rather than fit me into a
box. My only job needing a plan set was a $50K+ off grid system, which
is far less common than GT, and I was well served.
Allan
--
*Allan Sindelar*
allan at sindelarsolar.com <mailto:allan at sindelarsolar.com>
NABCEP Certified PV Installation Professional
New Mexico EE98J Journeyman Electrician
Founder (Retired), Positive Energy, Inc.
*505 780-2738 cell*
On 2/5/2020 9:34 PM, Garrison wrote:
> I will also vouch for Jeff and team at Planet Plan Sets. I started
> using them for overflow but they are becoming a primary resource for
> grid tie, battery, and commercial plan sets. Highly recommend.
>
> Garrison Riegel
> Rethink Electric
>
>> On Feb 5, 2020, at 1:44 PM, jay <jay.peltz at gmail.com> wrote:
>>
>> Hi William,
>>
>> I’m not sure if this is what you are looking for or not.
>>
>> jay
>>
>> https://www.planetplansets.com
>>
>>> On Feb 5, 2020, at 9:41 AM, William Miller <william at millersolar.com>
>>> wrote:
>>>
>>> Friends:
>>>
>>> I am barraged by offers for permit packet preparation services. I
>>> used to enjoy the process-- but to do it right takes me about 8
>>> hours, even with templates. This has got me to considering hiring
>>> out for this.
>>>
>>> Can anyone share their experience with any of these services, good,
>>> bad or in between?
>>>
>>> Which service have you used?
>>>
>>> What do you typically pay?
>>>
>>> Have you used them for grid-tie, off-grid or GTBB?
>>>
>>> Thanks in advance.
>>>
>>> William
>>>
>>> Miller Solar
>>> 17395 Oak Road, Atascadero, CA 93422
>>> 805-438-5600
>>> www.millersolar.com <http://www.millersolar.com/>
>>> CA Lic. 773985
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200205/f20fc079/attachment.htm>
More information about the RE-Wrenches
mailing list