[RE-wrenches] Convex modules

[Jerry Shafer]

Kristopher
OK great, well not great to me it is a shipping packaging issue, the
cardboard gap is spacing out each module and they were tightened down
untill one by one the frames came into contact and crushed them together,
the reason one is opposite is because it was installed backwards from the
rest to protect it.
Jerry

On Mon, Nov 18, 2019 at 11:04 AM Jerry Shafer <jerrysgarage01 at gmail.com>
wrote:

> Module bent or glass warped
> OK Kristopher is the glass warped or is the frame bent, looking at the
> pic, there is cardboard spacing each module so there is a gap. If the
> binders are in the middle then that will bend one or more modules on each
> side, now to bend them all the way through that center binder would have to
> be very tight or strapped on a truck in shipping. If it is the glass then
> its manufacturing and poor QC, my money if it is the frames is shipping and
> or packaging, but that's just me.
> Jerry
>
> On Sat, Nov 16, 2019, 7:12 AM Kristopher Schmid <solman at legacysolar.com>
> wrote:
>
>> So, I opened up a pallet of Jinko 400 watt half cell modules yesterday
>> and noticed that every module was convex to the glass side.  The center was
>> 1/4 inch higher than the corners.  Has anyone else seen this?  Should I be
>> concerned?  Manufacturing issue?  Intentional?
>>
>> Thanks,
>> Kris
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191118/562e40ab/attachment.htm>