[RE-wrenches] Convex modules

[Glenn Burt]

Was there any shipping banding circling the pallet and modules in the center of the module? Maybe someone in the shipping department got all gorilla on the banding machine? 

Obviously the packing cardboard pieces between the corners will cause some amount of space to be free in the center of the long sides of the modules and if banding were applied in the center where there was space available, it could be compressed and result in this kind of bending…

 

From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of Kristopher Schmid
Sent: Saturday, November 16, 2019 10:12 AM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] Convex modules

 

So, I opened up a pallet of Jinko 400 watt half cell modules yesterday and noticed that every module was convex to the glass side.  The center was 1/4 inch higher than the corners.  Has anyone else seen this?  Should I be concerned?  Manufacturing issue?  Intentional?

 

Thanks,

Kris

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191117/87c68541/attachment.htm>