[RE-wrenches] Convex modules

[frenergy]

Probably is not the cause but hard not to notice the big ding in the 
cardboard at about the right spot to cause your "deflection" from just 
the right whack with the fork lift.  Did it affect all the mods?

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net

On 11/16/2019 7:12 AM, Kristopher Schmid wrote:
> So, I opened up a pallet of Jinko 400 watt half cell modules yesterday 
> and noticed that every module was convex to the glass side.  The 
> center was 1/4 inch higher than the corners.  Has anyone else seen 
> this?  Should I be concerned? Manufacturing issue?  Intentional?
>
> Thanks,
> Kris
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-- 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191116/ffe279b8/attachment.htm>