[RE-wrenches] hueRe: Parts List For AC Couple Disconnect
jay
jay.peltz at gmail.com
Sun Nov 3 20:40:58 EST 2019
Hi mark,
Not quite.
The BB will keep charging unregulated until the battery voltage reaches high battery voltage cutout set point.
jay
peltz power
> On Nov 3, 2019, at 5:05 PM, Mark Frye <markf at berkeleysolar.com> wrote:
>
> OK, great, I am really getting the message, but I would like to understand, if for some reason the BB does not raise the frequency or the GT does not response, or the BB fails to stop on HBCO the ultimate consequence is unregulated charging of the battery until failure?
>
> On 11/3/2019 4:56 PM, Glenn Burt wrote:
>> Indeed, as long as nothing goes wrong with the BB inverters ability to shift the freq, and the GT's ability to follow the UL 1741 requirements, nothing bad should happen. However it is best practice to have a secondary method in place to ensure the GT drops out of the picture. That most commonly is ensured with an interposing relay controlled by the BB inverters knowledge of the battery charge, or a secondary device that performs the measurement.
>>
>> -Glenn
>> Sent from my 'smart'phone, so please excuse typos and spelling errors.
>>
>> ------ Original me
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191103/47549c35/attachment.htm>
More information about the RE-Wrenches
mailing list