[RE-wrenches] control or AC board

[Jerry Shafer]

Wrenches and Todd
Have done any software updates or other component changes, have you used
another mate to confirm same condition present. Have you confirmed that the
selling amount is accurate. I have had very little issues with the FX on
general but l have had mates act up.
Jerry

On Mon, Oct 28, 2019, 3:22 PM <toddcory at finestplanet.com> wrote:

> wrenches,
>
> i have a GVFX3648 that is acting weird,
>
> rather then the mate normally showing:
> AC <-> DC which shows the inverter's total power processing,
> minus "AC load"
> equals "Selling"
>
> now the AC <-> DC shows nothing and "AC load" = "Selling" are identical
> (both track the same level of load and selling)
>
> the unit is still selling, but the transformer is running hot and humming
> louder then normal... fet and cap temps are normal.
>
> question:
>
> is this the ac board
> or the control board
>
>
> i have spares for both but don't want to replace things that still work
> fine.
>
> thanks,
>
>
>
> todd
>
>
>
> Sent from Finest Planet WebMail.
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20191028/5d7e0cd2/attachment.htm>