[RE-wrenches] 120/240 to 3 phase 120/208

[Jay]

I was thinking that there might be some kind of solid state electronic version now?

Jay

> On Aug 6, 2019, at 8:59 PM, Mark Frye <markf at berkeleysolar.com> wrote:
> 
> Years ago I used something called a RotoPhase Phase Converter to supply some 3ph equipment on a site that only had 1ph (2ph?). Not efficient.
> 
>> On 8/6/2019 6:30 PM, Jay wrote:
>> Hi all
>> 
>> Is there a way to convert a 120/240v generator to a 120/208 3 phase output?
>> 
>> Thx
>> 
>> Jay
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>