[RE-wrenches] 120/240 to 3 phase 120/208

[Mark Frye]

Years ago I used something called a RotoPhase Phase Converter to supply 
some 3ph equipment on a site that only had 1ph (2ph?). Not efficient.

On 8/6/2019 6:30 PM, Jay wrote:
> Hi all
>
> Is there a way to convert a 120/240v generator to a 120/208 3 phase output?
>
> Thx
>
> Jay
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>