[RE-wrenches] Surface Pump

[jay]

Hi Mac,

Have you thought about a shurflo or flow jet pressure style pump?
I’m guessing from your info below the client has a small shurflo 9300 ( similar) submersible?
While most won’t do such low flow, getting a 24v one and running it at 12v is probably close to the flow rate you’d need and it will handle minor debris and do limited suction. 

The same controller for the submersible will work for that pump as well.

jay
peltz power



> On Jun 19, 2019, at 5:47 AM, Mac Lewis <maclewis1 at gmail.com> wrote:
> 
> Hi wrenches,
> 
> Does anyone have a recommendation for a solar pump that fits these requirements?
> 1.  100' head, ~1 gpm
> 2.  Able to handle dirty-ish water.  Filtered through gravel, screen but still coming from a variable creek.
> 3.  Surface pump with at least 8 ft of suction after priming
> 4.  Solar direct, ideally with a 60 cell panel with an LCB if necessary.
> 
> This client is aging and tired of servicing this submersible during Spring run-off.
> 
> Thanks
> 
> -- 
> 
> 
> 
> Mac Lewis
> 
> "Yo solo sé que no sé nada." -Sócrates
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190619/bde5da6b/attachment.htm>