[RE-wrenches] Cutting rail

[Jerry Shafer]

Porta band saw works great, Milwaukee has a nice one
Jerry

On Wed, Jun 12, 2019, 6:32 PM frenergy <frenergy at psln.com> wrote:

> Any suggestions for cutting rail with a Sawzall?  Many times at the end
> of a run of PVs there could be 5-6" of rail (in this case DPW P8).  I
> like to use a circular saw but sometimes I don't have enough clearance
> once the rail and panels are installed.  The sawzall works but I'm
> looking for a blade that doesn't load up with aluminum too fast and cuts
> without too much vibration.  Other ideas?
>
> Thanks,
>
> Bill
>
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.
> Taylorsville, CA 95983
> 530.284.7849
> CA Lic 874049
> www.frenergy.net
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190612/b06228de/attachment.htm>