[RE-wrenches] Supporting heavy flooded batteries

[William Miller]

Friends:



For years we have been supporting large form-factor flooded battery trays
by setting them on pressure treat 4X4s. We have developed a cradle we bolt
onto a special-order, narrow pallet jack and roll them over the wood
supports.  It is not a seismic solution, but it works.



Just today I have learned that at least one large battery manufacturer is
recommending against using any form of wood, apparently due to the
potential for rot and/or conductive paths.  I am told that the solution is
steel racking with plastic covers over the steel.



How are the rest of you supporting your large flooded batteries?



Thanks in advance,



William





Miller Solar

17395 Oak Road, Atascadero, CA 93422

805-438-5600

www.millersolar.com

CA Lic. 773985



Quote of the day:  “If there is a job you hate, get really,

really good at it. Maybe you will hate it less.“ W. Miller
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190403/87cdf6ae/attachment.htm>