[RE-wrenches] Corrugated Metal - Odd Seam Profile

[Andrew]

Hey Sam,

                Would Ejot work for this scenario? They have a wide range of washers for that. 

 

https://ejot-usa.com/products/solar-fastening-systems/for-exposed-fastener-metal-roofs/storm-washer-selection-guide

 

 

Andrew Perkins

Greenwired

P: 707-923-2001

F: 707-923-2077

1150 #1 Evergreen Rd

Redway, CA 95560

www.greenwired.com

Description: signature

 

 

From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Sam Haraldson
Sent: Thursday, February 14, 2019 9:05 AM
To: RE-wrenches
Subject: [RE-wrenches] Corrugated Metal - Odd Seam Profile

 

Wrenches,

 

I have encountered a corrugated metal seam profile that doesn't fit the standard S-5! Corrubracket we typically employ.  I'm looking for alternate solutions if you will, please.   The corrugation pattern is 1-1/4" from "ridge" top to "ridge" top and the depth of the "valley" is 1/4".  A drawing is attached explaining this further.  


 

-- 

Sam Haraldson,  <https://onsiteenergyinc.com/about-us#haraldson> Installation Manager
OnSite Energy, Inc.

NABCEP PV Pro #PV-042217-016714

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190214/6835346d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 8628 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190214/6835346d/attachment.png>