[RE-wrenches] Corrugated Metal - Odd Seam Profile

[Sam Haraldson]

Wrenches,

I have encountered a corrugated metal seam profile that doesn't fit the
standard S-5! Corrubracket we typically employ.  I'm looking for alternate
solutions if you will, please.   The corrugation pattern is 1-1/4" from
"ridge" top to "ridge" top and the depth of the "valley" is 1/4".  A
drawing is attached explaining this further.

-- 
*Sam Haraldson*, Installation Manager
<https://onsiteenergyinc.com/about-us#haraldson>
OnSite Energy, Inc.
NABCEP PV Pro #PV-042217-016714
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190214/33009c03/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: east-roof-seam-profile.jpg
Type: image/jpeg
Size: 59741 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190214/33009c03/attachment.jpg>