[RE-wrenches] Magnum inverter issue

[Drake]

I had a PAE 4024 run high voltage so that it 
wouldn't AC couple at all. My older PAE does not fluctuate.

At 08:14 PM 12/12/2018, you wrote:
>Hi all, I’ve had the following issue with a 
>new PAE 4024. It’s ac voltage will rise and 
>fall about 10+ volts ( 124-115) over about 10 
>seconds like clock work. Regardless of the load, 
>or battery SOC/voltage. I checked with a local 
>shop, they also have the issue. They checked all 
>their back stock and they all did the same 
>thing. However they had an older one, say 6 
>months old that didn’t do it. Nor do any of my 
>previous magnum installs do this. Clients are 
>not too thrilled with this as lights go up and 
>down in brightness. Magnum’s response was that 
>this is normal for an off grid inverter and that 
>somehow this “feature” has to do with it 
>being able to AC couple better. I’m writing to 
>ask if others have seen this as well and more 
>importantly if anyone has a fix? Thanks, Jay 
>Peltz Power 
>_______________________________________________ 
>List sponsored by Redwood Alliance List Address: 
>RE-wrenches at lists.re-wrenches.org Change 
>listserver email address & settings: 
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org 
>List-Archive: 
>http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html 
>List rules & etiquette: 
>www.re-wrenches.org/etiquette.htm Check out or 
>update participant bios: www.members.re-wrenches.org