[RE-wrenches] Microhydro and L-ion

[Ray]

I would think the standard diversion controller setup would work, but 
not sure.  I've been hoping that the Li+ manufacturers would add a relay 
control to their BMS.  Basically when the battery thinks its charged it 
just turns on the dump load.  I don't think the Li+ folks are near that 
far along yet.

Ray Walters
Remote Solar
303 505-8760

On 12/10/18 1:15 PM, frenergy wrote:
> How or can a  Harris DC microhydro (<.6 KW) work with existing PV 
> charged Outback FP2 (or Radian for that matter), whilst charging a 
> ~16KW L-ion "24" volt battery ?  I think that's a real word.  The 
> output of the hydro varies over time from .6KW to .1KW
>
> Bill
>
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.
> Taylorsville, CA 95983
> 530.284.7849
> CA Lic 874049
> www.frenergy.net
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>