[RE-wrenches] Insolation calc anyone ;)

Ray ray at solarray.com
Fri Nov 23 19:05:22 EST 2018


Is it possible that there was a lightning strike nearby, and the light 
flash created the high max power readings?    I'm calculating almost 
1400 w/ m2, (3075/2205 x 1000 w/M2) which is high, but not insanely 
high.  They used to use flash testing to rate modules, so a fairly 
instantaneous flash can do it.

Ray Walters
Remote Solar
303 505-8760

On 11/21/18 11:10 PM, bruce at willpowerelect.com wrote:
> Compadres,
>
> I have 4 identical arrays of 3 strings of 3 Solarworld SW 245 mono 
> (2010 model) to FM80s. When designing, not exceeding 150 voc was 
> critical. No record temp data available. Location ~ 4,000' Pacific 
> Northwest. Recently replaced an FM80 with 6 blown FETs showing max 
> power at 3075 watts! This from a 2205 watt array into a 24 volt 
> battery. Max historical voc is ~120. My guess at record low temp is 
> -10F. tc%/ºC MPP doesn't get anywhere close. What would the WM2 need 
> to be in order to achieve 3075 watts on a 2205 watt array? BTW, 2 of 
> the four original chargers are still working fine and one of them also 
> shows 3075 watts max power. Edge of cloud effect against snow field at 
> bottom of array?
>
> Cheers,
>
> Bruce Fiero-RMI
>
> *
> *
> *"*/*Energizing the Rogue Valley"*/
>
> 4115 S Pacific Hwy
> *Medford, OR 97501*
> *
> *
> *P:* 541.535.3965
> *F:* 541.512.0061
> *E:* bruce at willpowerelect.com <mailto:bruce at willpowerelect.com>
> *W:* Willpower Electric, LLC <http://www.willpower-electric.com>
>
> *CCB */191852/
> *Oregon Electrical Contractor */C681/
> **NABCEP*/**/*Certified Solar (PV) Installer *031409-38//*
> *DUNS* /191470363/
> *Energy Trust of Oregon Trade Ally */Solar (PV) Installation & Energy 
> Efficient Commercial Lighting Programs /
> /
> ///
> /**This email may contain information that is privileged, 
> confidential, or otherwise exempt from disclosure under applicable 
> law. If you are not the addressee, or if it appears that you have 
> received this email in error, please advise me immediately by reply 
> email, keep the contents confidential, and immediately delete the 
> message and any attachments from your system. /
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20181123/6ccad875/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sigimg0
Type: image/png
Size: 4536 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20181123/6ccad875/attachment.png>


More information about the RE-Wrenches mailing list