[RE-wrenches] Generac Eco-Gen 6 kw

[Chris Mason]

What's the error on the controller

On Mon, Nov 12, 2018, 00:49 John Blittersdorf <john.blittersdorf at gmail.com
wrote:

> Hello Wrenches,
>    I have a customer with a Generac EcoGen 6kw that starts and runs for
> about 30 seconds and then shuts down with high engine temp error. The
> engine is stone cold so it must be a temp sensor failure.  Disconnecting
> the sensor or jumpering the two leads together makes no difference. Has
> anyone seen this issue?  The engine runs real smooth until it shuts down.
>
> John Blittersdorf
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20181112/1dab0d29/attachment.htm>