[RE-wrenches] Generac Eco-Gen 6 kw

[John Blittersdorf]

Hello Wrenches,
   I have a customer with a Generac EcoGen 6kw that starts and runs for
about 30 seconds and then shuts down with high engine temp error. The
engine is stone cold so it must be a temp sensor failure.  Disconnecting
the sensor or jumpering the two leads together makes no difference. Has
anyone seen this issue?  The engine runs real smooth until it shuts down.

John Blittersdorf
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20181111/146fb1a6/attachment.htm>