[RE-wrenches] CC Temp Comp value

[Jeremy Rodriguez]

Hello,
  Can someone tell me the default BTS value for the Schneider MPPT60-150 CC?
It’s currently set for -54mv/C
I was going to use -5MV/C for the lead acid batteries, but wasn’t sure if the -54 equaled -5.4 due to a fractional conversion, so I left it.
  The controller did seem to go to float stage quickly, BTW.

Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1463 M St
Penrose Colorado 81240

Sent by Jeremy's iPhone. Sorry for typos and shorthand.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180824/d906da39/attachment.htm>