[RE-wrenches] UL/CSA listed battery monitor?

bob at midnitesolar.com bob at midnitesolar.com
Tue Jul 10 14:36:05 EDT 2018


Just to clarify, MidNite has two (2) battery monitors....  Sort of...

The  MNBCM that Tom referred to is a shunt-less voltage monitor that 
lets you know when
the battery has not received an Absorb charge cycle for 1 week and 2 
weeks.  It also has
somewhat of a voltage meter.  It is purely based on battery voltage and 
looks for the rise
in voltage for an accumulated of around 2 hours or so...  It has a 
semi-circle of LEDs on it.

Then the Whizbang Junior is a 500A @ 50 mV shunt tack-on circuit board 
that connects to
the MidNite Classic or Kid charge controllers that calculates State Of 
Charge based on
Amp-Hours in and out of the bank.

Thanks,
boB


On 7/10/2018 9:09 AM, Dan Fink wrote:
> The Midnite battery monitor requires a shunt, it piggybacks onto that 
> shunt.
>
> Dan Fink
> Professor of Solar Energy Technology, Ecotech Institute
> IREC Certified Instructor™ for:
> ~ PV Installation Professional
> ~ Small Wind Installer
> Executive Director, Buckville Energy
> NABCEP Registered Continuing Education Providers™
> NABCEP Associate
>
> 970.672.4342
>
>
> On Tue, Jul 10, 2018 at 8:53 AM, Tom Duffy <Tom at solar-biz.com 
> <mailto:Tom at solar-biz.com>> wrote:
>
>     Look at either the BlueSky IPM Pro Remote with shunt or the
>     Schneider Battery monitor. The MidNite Battery monitor is more
>     basic as it has no shunt
>
>     Kind regards
>
>     *Tom Duffy*
>
>     *Senior Solar Design Engineer*
>
>     Solar-Biz-new-logo-800X300
>
>     Your 5-star rating really matters to us. Click to rate!
>     <https://goo.gl/WVpOYr> Solar Biz™ team workshard to provide you
>     the best customer service. If we don't deserve a 5-star rating,
>     please contact us directly.  We'll do what it takes to win your
>     approval.
>
>     */Please note my new E-Mail/*
>
>     *E-Mail: **tom at solar-biz.com <mailto:tom at solar-biz.com>*
>
>     *Main Number: **888-826-0939*
>
>     *Panama Office: **507-836-5588 X 122*
>
>     *Direct Toll Free:**888-503-6772*
>
>     *International: **575-539-2111 X 122*
>
>     *SKYPE Address: **thesolarbiz (/e-mail first/)*
>
>     /I love nuclear energy! It's just that I prefer fusion to fission.
>     And it just so happens that there's an enormous fusion reactor
>     safely banked a few million miles from us. It delivers more than
>     we could ever use in just about 8 minutes. And it's wireless!"///
>
>     *Confidentiality Notice*:This message including any attachments is
>     for the sole use of the intended recipient and may contain
>     confidential and privileged information. Any unauthorized review,
>     use, disclosure or distribution is prohibited. If you are not the
>     intended recipient, please contact the sender and delete any
>     copies of this message.
>
>     **
>
>     *From:*RE-wrenches
>     [mailto:re-wrenches-bounces at lists.re-wrenches.org
>     <mailto:re-wrenches-bounces at lists.re-wrenches.org>] *On Behalf Of
>     *Hilton Dier III
>     *Sent:* Monday, July 09, 2018 9:06 PM
>     *To:* re-wrenches at lists.re-wrenches.org
>     <mailto:re-wrenches at lists.re-wrenches.org>
>     *Subject:* [RE-wrenches] UL/CSA listed battery monitor?
>
>     I have a client who needs a monitoring system for a 48V nominal
>     NiCad battery bank on a boat. It's 4 parallel strings of 6V
>     batteries. (Not ideal, I know) It's a passenger boat in Canada so
>     all electrical devices need to be UL/CSA listed. None of the
>     Bogart Engineering monitors are listed.
>
>     Any suggestions appreciated.
>
>     Thanks!
>
>     Hilton
>
>     -- 
>
>     Hilton Dier III
>
>     Missisquoi River Hydro
>
>     Renewable Energy Design
>
>
>     _______________________________________________
>     List sponsored by Redwood Alliance
>
>     List Address: RE-wrenches at lists.re-wrenches.org
>     <mailto:RE-wrenches at lists.re-wrenches.org>
>
>     Change listserver email address & settings:
>     http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>     <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
>
>     List-Archive:
>     http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>     <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
>
>     List rules & etiquette:
>     www.re-wrenches.org/etiquette.htm
>     <http://www.re-wrenches.org/etiquette.htm>
>
>     Check out or update participant bios:
>     www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180710/a34a53c2/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 5987 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180710/a34a53c2/attachment.jpg>


More information about the RE-Wrenches mailing list