[RE-wrenches] rain guard

[MDElectricSolar]

We always try and move the lower edge of the array up approx 12" for this
exact reason, it's getting harder and harder with the 3' fire clearance
rule.

Mike

On Mon, Apr 30, 2018 at 5:32 AM Nik Ponzio, Building Energy <
nponzio at buildingenergyus.com> wrote:

> We have a roofmount PV array that is very close to the run gutter. The
> customer is concerned that the runoff during heavy rain will overshoot the
> gutter. So I'm looking for a product that will mount at the lower edge of
> the array and slow down the rain water. I looked that Alpine SnowGuards but
> they all have a small gap between top of solar module and bottom of the
> snow rail.
>
> Any suggestions?
>
>
> --
> Nik Ponzio
> Building Energy
> 1570 South Brownell Road
> Williston, VT 05495
> 802-859-3384 ext.115
> http://www.BuildingEnergyVT.com
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>

-- 
Michael D Nelson
MD Electric & Solar Inc.
Office: 707-884-1862
Cell: 707-684-0064
www.mdelectricsolar.com
www.facebook.com/mdelectricandsolar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180430/342f4a5a/attachment.htm>