[RE-wrenches] rain guard
frenergy
frenergy at psln.com
Mon Apr 30 10:41:50 EDT 2018
Nik,
This sounds like a new install. Many times I'll suggest to
a customer to "see how it goes" with something like this. It may turn
out to be a very occasional event that they are willing to accept, and
thus reduce the another failure point factor. Do you have a snow issue
there also? Its possible the lower edge of the PV frame will slow it
down a bit?
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
On 4/30/2018 5:31 AM, Nik Ponzio, Building Energy wrote:
> We have a roofmount PV array that is very close to the run gutter. The
> customer is concerned that the runoff during heavy rain will overshoot
> the gutter. So I'm looking for a product that will mount at the lower
> edge of the array and slow down the rain water. I looked that Alpine
> SnowGuards but they all have a small gap between top of solar module
> and bottom of the snow rail.
>
> Any suggestions?
>
>
> --
> Nik Ponzio
> Building Energy
> 1570 South Brownell Road
> Williston, VT 05495
> 802-859-3384 ext.115
> http://www.BuildingEnergyVT.com <http://www.BuildingEnergyVT.com>
>
>
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
--
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180430/5c6e1f97/attachment.htm>
More information about the RE-Wrenches
mailing list