[RE-wrenches] Stuck in a furl

Kienan Maxfield maxfieldsolar at hotmail.com
Sat Mar 10 22:58:02 EST 2018


Mac,

Did you lower the turbine or try to do anything with it? I don't have a lot of experience with these but I did have one customer with the exact same turbine, and one time the tail got stuck in the furled position. I banged on the tower a bit and jiggled the guy wires vigorously and it came loose and straightened out, and it hasn't had any problems since. That time there was nothing wrong with it... it just got a little stuck. That may be totally different but it might give you a glimmer of hope.

Thanks,
Kienan


Maxfield Solar
maxfieldsolar at hotmail.com<mailto:maxfieldsolar at hotmail.com>
(801) 477-0-SUN (477-0786)
(801) 631-5584 (Cell)

________________________________
From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> on behalf of Mac Lewis <maclewis1 at gmail.com>
Sent: Wednesday, March 7, 2018 12:42 PM
To: RE-wrenches
Subject: [RE-wrenches] Stuck in a furl

Hello wrenches,

I have a client with an older Whisper 200, 1 kW wind turbine.  We didn't install this but have taken over the site maintenance since the original installer left town.  The site recently experienced prolonged relatively high winds for 3-4 days.  After that, he went out and noticed that the tail is stuck in the side-furling position.

[cid:ii_jehhmqjl0_16201fa681cc1705]




  I'm not very familiar with this turbine or wind turbines in general, but looking at a manual, it looks like we may need a new bushing or maybe even a new casting.  Does anyone have any idea where I could order parts for this turbine?  Is there a suitable replacement turbine we should be looking at?  At last check, the turbine was putting out good power and passed all electrical checks.

Thanks in advance for your expertise


--



Mac Lewis


"Yo solo sé que no sé nada." -Sócrates
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180311/0685364a/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 138966 bytes
Desc: image.png
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180311/0685364a/attachment.png>


More information about the RE-Wrenches mailing list