[RE-wrenches] B3 Bypass breaker

[jay]

This product has been out now and maybe its doing a similar thing as this not available product B3?

http://connectder.com/products/


jay

peltz power

> On Feb 22, 2018, at 3:54 PM, Dana <dana at solarwork.com> wrote:
> 
> Per my Master AC electrician, you do not have to arrange for a meter pull with the utility. That to me is one less piece of brain damage to deal with.
> I have not checked out the cost of a back fed breaker VS this item.
>  
> ----------------------------------------------------------------------------
> Dana Orzel                              Great Solar Works, Inc.
> C - 208.721.7003                       dana at solarwork.com <mailto:dana at solarwork.com>
> Idaho Contractor - # 028765         Idaho PV # 028374
> NABCEP # 051112-136                       www.solarwork.biz <http://www.solarwork.biz/>
> "Responsible Technologies for Responsible People since 1988"  
> P Please consider the environment before printing this email.
>  
>  
> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Lorenzo Ortiz
> Sent: Thursday, February 22, 2018 1:10 PM
> To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
> Subject: Re: [RE-wrenches] B3 Bypass breaker
>  
> How is this different/better/less expensive than just doing a supply side tap using insulated connectors (NSI's)?
>  
> From what I can tell, it only works on panels that are fed with wire conductors from the meter not hard bussing, so why not just tap it?
>  
>  
>  
> On Thu, Feb 22, 2018 at 7:20 AM, Sam Haraldson <sam at onsiteenergyinc.com <mailto:sam at onsiteenergyinc.com>> wrote:
>> On Wed, Feb 21, 2018 at 8:00 AM, Dana <dana at solarwork.com <mailto:dana at solarwork.com>> wrote:
>>> Has anyone used the B3 buss-bar bypass breaker setup yet? www.qfe002.com <http://www.qfe002.com/>
>>  
>> At SPI this year I spoke with one of their reps briefly and they indicated that after many years of trying to get the product ready it was finally going to be in production.  I have researched it no further than that however.  
>>  
>> - Sam
>>  
>>  
>> -- 
>> Sam Haraldson, Installation Manager
>> Office: 406.551.6135 <tel:(406)%20551-6135>
>> sam at onsiteenergyinc.com <mailto:sam at onsiteenergyinc.com>
>> onsiteenergyinc.com <http://onsiteenergyinc.com/>
>> 
>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org>
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
>> 
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
>> 
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180222/d95de1d7/attachment.htm>