[RE-wrenches] Concorde Lifeline Battery failures
jay
jay.peltz at gmail.com
Sat Jan 20 08:51:49 EST 2018
HI Darryl,
What size battery are you looking for? In a battery enclosure etc?
jay
peltz power
> On Jan 19, 2018, at 10:25 PM, Darryl Thayer <darylsolar1 at gmail.com> wrote:
>
> I am about to order AGMs for two backup power systems, help, they will be in float all the time (except for emergencies. I have a set of C&D pure lead that was installed in 2003 and are still serving, the Last cycle was last July for a two-day outage, What batteries do you recommend?
>
> On Fri, Jan 19, 2018 at 10:26 PM, William Miller <william at millersolar.com <mailto:william at millersolar.com>> wrote:
> Friends:
>
> I had a similar experience with Trojan vented L-16s about two years ago: all of a sudden the product would not perform as it used to. A vendor let slip that plate chemistry had been modified. I was later told that charge voltages needed to be higher than ever recommended previously-voltages difficult to achieve off-grid. This product degradation has been discussed here. Likewise it was helpful to corroborate experiences. Thanks, everyone!
>
> William Miller
>
> > On Jan 19, 2018, at 4:12 PM, Maverick Brown <maverick at mavericksolar.com <mailto:maverick at mavericksolar.com>> wrote:
> >
> > Same here! We use mostly SunExtender and have had the same issue. As far as I know, they are the same battery with different labels. I have had some success in being a LOT more aggressive with voltages & times and sometimes going above FLA settings to get banks to recover and perform closer to spec. Makes me nervous though, since more than 50% of a customer’s investment can just vaporize with what one thought was appropriate charge settings. I suggest EQ as the new norm for AGMs, especially in grid-tied-battery-backup cases and where off-grid use does not give adequate absorb time.
> >
> >
> ___
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180120/bf2204a0/attachment.htm>
More information about the RE-Wrenches
mailing list