[RE-wrenches] battery buss bar stock

[Jerry Shafer]

More then two banks require fusing or breakers, its best on anything amount
including one all to be located at or near the battery.
Jerry

On Dec 1, 2017 10:03 AM, "jay" <jay.peltz at gmail.com> wrote:

> HI All,
>
> I’m wondering if anyone has a good source for battery buss bar stock.
> Either pre made ones or stock I can use to make myself.
>
> It would be for larger Rolls GEL 2v in this case but other battery
> sizes/types as well.
>
> thanks
>
> jay
>
> peltz power
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
> org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>