[RE-wrenches] outback GSLC parts

[Lones Tuss]

Hello Wrenchers
On the buss bar question. 
There is the stripped down version of the GSLC. 
Please see page 7 in the manual (Link Below).
http://www.outbackpower.com/downloads/documents/Make_the_Power/radian_gs_load_center/gs_loadcenter_install.pdf

 It comes with the pictured items but also included are the positive buss plate 
and the 2 positive buss bars for the power modules positive dc connections. 
 The part number is simply   GSLC


Below is a link to the spec sheet.
http://www.outbackpower.com/downloads/documents/Make_the_Power/radian_gs_load_center/GSloadcenter_specsheet.pdf

I hope this helps 
Take Care All

Lones Tuss
Applications Engineer
OutBack Power Technologies
17825 59th Ave NE, Suite B, Arlington, WA 98223
360.618.4383 Office | 425.213.8794 Cell
www.outbackpower.com

-----Original Message-----
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of jay
Sent: Wednesday, November 8, 2017 12:44 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] outback GSLC parts

HI All,

Does anyone know if its possible to buy the inverter positive DC bus bars separately?
( its the part that goes from the breakers to the power modules)

And if so where?

My next GSLC I’m looking to use the most striped down version but if I can’t get the bus bars its hard to mount the main inverter breakers.

thanks
jay

Peltz power




_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org