[RE-wrenches] outback GSLC parts

[Dana]

CED electrical supply in at least 4 states has gotten for me. 
I think the aluminum bar is actually a "ground bar" & typically can be ordered with a variety of wire spaces. I keep a couple of pairs of Red & Black end pairs in my onsite trailer & add the appropriate sized grounding screw bar(?) as needed.
I want to say AEE may have them in their catalogue, but I am not sure on that.

----------------------------------------------------------------------------
Dana Orzel                       Great Solar Works, Inc. 
208.721.7003                       dana at solarwork.com
Idaho Contractor - # 028765          Idaho PV # 028374
NABCEP # 051112-136                       www.solarwork.biz
"Responsible Technologies for Responsible People since 1988"  
 Please consider the environment before printing this email.


-----Original Message-----
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of jay
Sent: Wednesday, November 08, 2017 1:44 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] outback GSLC parts

HI All,

Does anyone know if its possible to buy the inverter positive DC bus bars separately?
( its the part that goes from the breakers to the power modules)

And if so where?

My next GSLC I’m looking to use the most striped down version but if I can’t get the bus bars its hard to mount the main inverter breakers.

thanks
jay

Peltz power




_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org